We have solved the four major methods of cracking the signal jammer

We have solved the four major methods of cracking the signal jammer

Four ways to crack the school signal shielding! Don’t worry about exams

First declare that our company has completely solved this problem!

Method 1: Number segment cracking method

The school uses an older signal jammer that can only shield the old number segments of PHS, China Mobile, and China Unicom, such as the new Telecom Tianyi 186, China Unicom’s Wo number segment and China Mobile’s TD-SCDMA etc. number segment. of! Simply put, the China Unicom and China Mobile numbers beginning with 13 15 and all PHS numbers can be blocked! The beginning of 18 will not be blocked!

jamming signal

Method 2: Band cracking method

Because the school’s cell phone jammer works to shield the mobile phone by interfering with the mobile phone signal of the designated band, so long as the mobile phone’s receiving transmission frequency can be modified to prevent it from being shielded, the jammer can only shield the mobile phone signal of 900—1800MHZ, and the mobile phone The receiving and transmitting frequency of 850-1900MHZ is much larger than the shielding range of the jammer, so as long as the receiving and transmitting frequency of the mobile phone is adjusted to the maximum in the mobile phone settings, the mobile phone signal can be received normally.

Method 3: wifi cracking method:

This method has high requirements for mobile phones and the environment, but the effect is the best and most concealed. The premise is that the mobile phone must have wifi wireless Internet access function and there must be an available wireless network around (it is almost impossible in our first high). After searching and successfully connecting to an available wireless network with your mobile phone, you can still surf the Internet even if your mobile phone has no signal and no traffic. At this time, if you want to find the answer you can’t find, you can use Baidu. If you want to send the answer, you can use QQ. Row. A method of hyper perversion.

Method 4 Bluetooth cracking method:

It is suitable for students with a distance of no more than 50 meters to pass answers to each other. It is also possible to test two adjacent classrooms by myself. Install bluetooth software like bluetooth hacker on the mobile phone, and then both sides turn on the bluetooth visibility. In the software option, there is an option to force the message to be sent via bluetooth. Enter the answer and force it to be sent, and all bluetooth mobiles that turn on the visible bluetooth will accept To the answer, one person sends the whole class to share. The above method is a method that I came up with after several days of meditation. It is dedicated to all the students in a high school who are distressed by the signal being blocked. I hope that using the above methods can liberate students from the abnormal school and get relaxed and happy!

Leave a Reply

Your email address will not be published.