The test room high power jammer has become an indispensable tool in the test room, escorting the information security of the test room. However, if we do not use the equipment correctly, there will be poor results, or even an exam room accident. The following Texin Electronics as a manufacturer will share the correct use of the test room signal jammer.
1. The effective shielding range of the test room signal jammer will be different in different use sites. This is closely related to the signal field strength on site. The shielding range of mobile phones of different standards may not be the same at the same site;
2. The factors that affect the shielding range include but are not limited to: distance from the base station, orientation, obstacles, the wall material of the site building, the installation height of the shield, the installation specifications, etc.;
3. Each antenna has a frequency band identification, which must correspond to the frequency band identification on the host one-to-one. Before turning on the jammer, ensure that each antenna is connected reliably. It is never allowed to turn on the device without connecting the antenna;
4. The surface temperature of the shield is about 40～50℃ after working for a long time, which is normal. If the surface temperature is too high, please turn off the power and try to contact your local dealer or agent;
5. The normal installation height is 1.8 meters ~ 2.5 meters, try to choose a place where there are no obstacles between the target shielding area. The wall-mounted installation requires the antenna to face up vertically. When placed on a desktop, the antenna can be folded 90 degrees and then up vertically. There should be no AC power lines or other audio and video lines within 0.2 meters of the antenna;
6. During use, in order to avoid possible interference with some electronic equipment, try to keep it at least 1 to 2 meters away from the following common equipment: audio, wireless microphone, radio, computer, TV, Wi-Fi router, etc.
The above are the precautions when using the test room signal jammer introduced by Jammer-mart. I hope it can help everyone.