What needs do we need GPS jammers to meet?

Since the GPS system has been installed in place, it is of great help to us. Based on the GPS system, we have developed many devices to help us carry out military use and life. But the GPS system also poses a very dangerous threat to us, it can easily reveal our location. Anyone can easily find our location by putting a small GPS device in our car or even pocket. In order to protect ourselves from the danger of illegal tracking, we need GPS jammers. GPS jammer is an anti-GPS electronic device, which can transmit a stronger signal to cover the GPS signal with the same frequency as the GPS signal. Since this signal from the GPS jammer is stronger than the GPS signal, it may cover and hide the GPS signal, so that all GPS devices in a certain area cannot receive the GPS signal and therefore cannot work normally.

4g cell phone jammer

GPS devices and GPS jammers are becoming more and more popular with us in our lives. GPS equipment is very convenient to use and can cause deadly threats. It is easy for bad guys to use it to track us. This is why we developed GPS jammers-we need a safe and convenient way to protect ourselves. This GPS jammer can be used anywhere, once it is turned on, it will send a stronger signal, and all GPS devices will be unusable. However, when we turn it off, all GPS devices will resume working. GPS jammers will not cause any harm to any electronic equipment and human health.

Can the test signal blocker block all communication signals?

Can the test signal jammer shield all communication signals? Speaking of which, many people are unfamiliar with the test signal jammer device. In fact, it has been widely used in the college entrance examination examination room. In the college entrance examination last year, many examination rooms installed this kind of equipment. The response has been very good, and it has been proven to have a good effect on preventing electronic signal cheating. Starting this year, it has been vigorously promoted so that more examination rooms can also install shields.

4g cell phone jammers for sale

Nowadays, the emergence of shielding device has solved many hidden dangers of disrupting the order in the examination room, so that candidates can take the exam in a fair environment. The principle of this kind of test signal jammer is actually to isolate the electronic signal to make the communication signal of the mobile phone fail, which can prevent the phenomenon of using mobile phones to cheat. Not only that, it also has a good shielding effect for the WIFI2.4G signal. Say that the effective range is within a radius of 0 to 30 meters, generally a low-power test signal jammer is enough to cover an entire classroom, which meets the needs of the test room for shielding signals, and because the endurance of this equipment is generally three Although the heat dissipation is poor, it also leads to a particularly high price/performance ratio. It is especially suitable for schools to purchase signal shielding for examination rooms. Many customers have troubles about the purchase of test signal jammers. At this time, you can contact greatjammer to inquire about the price of test signal jammers. It is a manufacturer with many years of high-quality and rich experience in the development of jammers. It has one The first-class technical team provides technical support for product quality, which is deeply favored and selected by customers.

What is the difference between the experimental data and the actual data of the test signal jammer?

What is the difference between the experimental data and the actual data of the test signal jammer device? Now that the college entrance examination season is approaching, the examination rooms of major schools are getting busy because they have to make preparations in advance for the arrangement of the examination rooms, and they have to purchase a batch of equipment in advance. This is the test signal shield. This kind of equipment that can effectively prevent electronic signal cheating in the college entrance examination is also a very popular method in major examinations. We all know that its effective range is differentiated according to the size of the power, and this data is generally purchased It is written on the instruction manual when the equipment comes back. At this time, new questions will arise. How much is the difference between the experimental data of the test signal shield and the actual data?

Desktop 5g jammer

​To answer this question, you must first know what is called experimental data. The meaning of experimental data is that the test signal shield is in an open environment, and there are no base stations and other things that affect the magnetic strength within 500 meters. The shielding range produced ; What about the actual data? This is very clear, because when the test signal jammer is actually put into use, it is not clear how far the base station is from the test room, or whether there is a need to penetrate walls, so in general, the actual data of the jammer It needs to be actually put into use to know. Now when choosing an exam signal jammer, you must choose a professional one, and a professional machine must be provided by a professional manufacturer. Among them, Gteatjammer is a professional manufacturer with many years of experience in the research and development of exam signal jammers. Its product quality experience is strictly quality inspection. Each product is trustworthy, and it has gained the trust and affirmation of many customers. It is a wise choice worth buying.

Devices that can detect jammers are used by law enforcement

Humphreys is a University of Texas expert and is frequently consulted by law enforcement agencies and other government security experts. He said there may be other jammer incidents that have not been made public.
He said: “When I was questioned by the FBI, they often mentioned incidents of frequency jammer and even deception … but of course they did not reveal the details to me.”

Humphreys demonstrated how to use deception to use GPS for navigation to control a vehicle. In June 2012, he and several graduate students demonstrated the technology to Department of Homeland Security officials by commanding civilian drones; The following year, they had a larger run – a 213-foot superyacht – and tricked its GPS navigation system, causing the ship hundreds of meters to deviate from its course in the Mediterranean without issuing any vessel warnings.

gsm wifi jammer

Humphreys said these demonstrations require considerable effort and expense, and it is estimated that it took five years to develop “devices capable of simulating and then overwhelming real GPS signals.”

But last year, when Chinese technical experts showed the Defcon Hacking Conference how to use a $ 300 software radio to spoof a GPS, the situation changed dramatically.

Humphries said, “Now I have the ability to download what’s available online to a commercial RF card and build your own scooter.” “For those with little experience of RF work, it will only take a few hours.”

Humphries estimates that the result is that “since 2012, the difficulty of launching wave jammer attacks has decreased by about 100 times”.
Although interference “in the wild” is generally an annoying crime causing a brief interruption of the GPS or a fall of a cell phone tower when someone is nearby, the risk of cheating with inappropriate hands may be greater. tall.

As the head of NovAtel Soar said, “The runny-nosed kid in the bedroom can now be our worst nightmare.”
The police began to retaliate. Curry said, for example, that jammer detection equipment manufactured by Chronos Technology had been in use for about a year and “was starting to find a way to use it as standard.”

No pornography in schools: CBSE forces jammers to block websites on campus

The government told the Supreme Court on Friday that it had asked the Central Committee for Secondary Education (CBSE) to explore options for placing jammers to prevent students from accessing child pornography online in schools.

The court hears a petition asking the government to ban all websites hosting pornographic content.
Another attorney general, Pinky Anand, said 3,522 sites were blocked in June, but the step of installing jammers on school buses was ruled out to prevent young people from being sexually abused on Internet.

“It is not possible to place a wifi jammer on the bus, but its installation on campus is being considered. The CBSE has been tasked to discuss this problem with the school administrators.” Said Anand.

5 bands portable jammers

The CBSE is the highest education committee in the country, with more than 10,000 affiliated institutions.

Most schools teach computers and the Internet is now part of the curriculum, not only increasing knowledge, but also putting students at risk of online sexual exploitation. It’s still a gray area for kids on school buses to watch pornography on their phones.

As many victims did not come to the police station due to fear and humiliation, there is no precise data on the number of Indian children exploited by pornographic material. According to the National Criminal Records Office, 96 cases of children sexually exploited online were reported in 2015.

The government told the three-judge panel headed by Judge Dipak Misra that it would take action to address “all the circumstances”.

He said the Central Bureau of Investigation (CBI) shared an Interpol list of online child sexual abuse material with the government, then ordered internet service providers to block those sites. This list will be updated regularly.

India does not have a centralized mechanism to monitor websites containing child pornography. The government committee recommends that Internet service providers ban these sites until a monitoring system is created.

In addition, service providers are required to educate subscribers about the use of parental control filters in their machines.

Answer common questions about mobile phone signal jammers

1. Is there radiation?
If high-power equipment, such as 5W (37dBm) above the host computer may also have greater radiation. Generally, the output power of mobile phone signal booster is within 200mW (23dBm). After reaching the antenna, it is generally within 5mW (7dBm). After other losses, the indoor signal after installing a cell phone jammer is generally around -50dBm to -75dBm. Good outdoor signals are generally around -40dBm to -75dBm.

handheld blocker

When the mobile phone is talking, the GSM mobile phone is talking in a weak signal environment, and the worst radiation power can reach 1W (30dBm). After installing the amplifier, the radiated power of the mobile phone call is about 10mW (10dBm). It can also be said that after installing a small power amplifier in a poor signal environment, the mobile phone reduces radiation when talking.

2. How to distinguish the quality of signal amplifier?

1. Look at the workmanship and choose the brand. If you use more, you can take it apart and compare it internally.

2. There are many inferior signal amplifiers on the Internet, mainly because some circuits for optimizing signals, such as automatic gain control, are omitted. Generally, there are less than 80 devices, and the host with complete circuits generally has more than 200 devices.

3. Inferior cell phone signal amplifiers will cause serious interference to the base station after a large number of installations, making it impossible to make calls when the signal is full. Of course, there are interferences of good quality, but the interference of the same power is several times and dozens of times smaller.

3. Why can’t I make a call when the installation signal is full?

The signal amplifier is a simple device developed at the intermediate frequency of China Mobile and China Unicom. If there is no signal or very weak indoor China Unicom and China Mobile, it should be no problem to use this device. If one party has a full signal and the other has no signal, interference will occur in this case, so it is not recommended.

Overview of wireless signal shielding principle of signal jammer

Let’s take a look at the overview of the principle of wireless signal shielding of signal jammers.

The working principle of mobile communication is that within a certain frequency range, wireless devices (mobile phones, etc.) communicate with the base station through radio waves, and complete data and sound transmission with a certain baud rate and modulation method. When the mobile phone communicates, it communicates with the base station through the uplink frequency, and then transfers the signal to the mobile service switching center to realize the call. In the standby state, the mobile phone communicates with the base station through the broadcast control channel. Once there is a call demand, it will be allocated to the mobile phone service channel according to the specific conditions of the channel near the terminal through the request, so that the mobile phone can jump to the service channel to realize the call and data transmission . At the same time, wireless communication must ensure a sufficient signal-to-noise ratio to effectively receive and complete communication.

desktop signal blocker

According to the above working principle, the cell phone signal jammer is generally composed of power supply, electronic scanning control unit, segmented radio frequency module unit, amplifier unit, transmitting antenna unit and other parts. The scanning signal generated by the signal generator passes the inverter, enters the oscillator and modulates it to the mobile communication working frequency band, and then is amplified by the power amplifier and the voltage regulator tube controls the power. The amplified frequency sweep signal is transmitted into the air in the form of radio waves. Because the frequency sweep signal forms garbled interference in the message signal received by the mobile phone (increasing the proportion of noise and noise signals to the device threshold), the mobile phone cannot receive the normal data sent by the base station, so that the mobile phone cannot establish a normal connection with the base station, thereby causing the mobile phone to disconnect Base station communication network. The mobile phone exhibits the phenomenon of no signal and no service system in the search network, which achieves the blocking effect. The mobile phone signal jammers produced by our company can achieve super high shielding effect, safe and simple.

The interference power of the jammer is fixed, and the shielding radius of the unblocked space is determined by the path attenuation and the signal level of the receiving base station. To realize interference from mobile phone signal jammers to mobile networks, it is necessary to ensure that the signal field emitted by the jammer is stronger than that of the mobile signal in the interference area. The closer the interference location is to the base station, the stronger the field strength and the smaller the effective interference area. , The farther the interference location is from the base station, the weaker the field strength and the larger the effective interference area.

It can be seen that within a certain transmit power, the interference range depends on the field strength in the interference area. No matter how powerful the jammer is, as long as the transmit power is a fixed value, as the distance increases, the interference signal strength will gradually attenuate and lose Interference ability. The following table shows the comparison table of distance and path attenuation. Then the output channel power of the jammer, the base station signal level, and the coverage line gain can determine the theoretical coverage radius with reference value.

How to make a signal blocking cellphone pocket?

For some at the National Republican Congress in Cleveland, the choice of protective accessory is an AR-15 rifle that is casually slung over the shoulder. For the Los Angeles-based artist and activist Tim Schwartz, it is a discreet pouch made of matt silver ripstop fabric that houses his cell phone.

This cell phone signal jammer blocks the signal that cell phones keep sending – a feature that Schwartz says is essential during an unpredictable, politically charged event like the Republican National Convention.

4g cell phone jammer

“I think it’s sensible that everyone should protect themselves when they get into a situation where they don’t know what’s going to happen,” says Schwartz. In particular, he states, “You can be easily followed by turning your phone on and off.” And if there is a disruption, the information could even be used retrospectively: “The government could request records and show that you were in this area when something went wrong.”

The Electronic Frontier Foundation, a non-profit organization dedicated to protecting civil liberties in the digital world, advises protesters that while their phones are powerful tools for documenting photos and videos, they also contain a wealth of personal information, including contacts, location and message history, emails and private credentials. “Our whole life is on our devices,” says Schwartz.

These high frequency blocking pockets, known as Faraday cages, are readily available to the powerful population that Schwartz calls the “techno elite.” Quartz reported on a $ 720 value of a cash transport and RF blocking bag, and President Barack Obama is traveling with a tent that serves that purpose.

For RNC protesters looking for a cheaper DIY option, Schwartz is holding “office hours” for protesters at the Spaces gallery in Cleveland to sew their own signal-blocking cellphone cases according to instructions from Berlin-based artist Aram Bartholl. Its meetings will take place today (July 19) and tomorrow from 1 p.m. to 4 p.m.

This is a protection that non-protesters could also consider, Schwartz says. “It’s like having long passwords,” he says. “It’s one of those things we should do, but we never get to it.”

Schwartz provided protesters with a copper taffeta fabric, a sewing machine and advice. He says his eighth grade sewing home economics training is appropriate for the job, and notes that the most important step is to make sure all of the edges of the bag are folded and secure.

Here are the directions from Aram Bartholl’s “Kill Your Phone” website. Materials are available on lessemf.com:

Cut 12 cm strips from your roll barrier fleece.
Make pieces of 50 x 12 cm, each for a bag. (i.e. you get 2 pieces of a 1 m long strip of rolls.)
Fold your 50 x 12 cm piece to 25 x 12 cm
Fold the long sides again, 1 cm each, and pin them in place with needles.
Sew two straight seams on the left and right.
Fold the opening at least 2 times! Find a paper clip or clip to close the pouch.
Done!
Schwartz previously developed a tool for victims of the Haiti earthquake to find their missing family members in 2010. He then “fell into the rabbit hole of digital privacy” and worked with the Center for Legal and Information Policy (CLIP) at Fordham Law School to investigate online privacy and reconcile it with security .

In recent years, Schwartz has conducted workshops on digital data protection such as “How to be a whistleblower” at schools like Cal Arts and UCLA, partly in collaboration with the web-based data protection movement Cryptoparty. For the remainder of the month, he will continue his work as an artist-in-residence at Spaces, where he is hosting events like a “dark web treasure hunt” to help people learn more about digital privacy.

Application place of portable signal jammer

Portable (drag box type) wireless signal jammer, can be used for important leaders/VIP VIP security, individual combat, special police team, EOD team, anti-terrorism unit, anti-drug unit, explosion-proof team, security checkpoint, administrative law enforcement, hostage negotiation, Various applications such as border control and military security forces. It can be used both portable and in-vehicle. When used in vehicles, the vehicle-mounted dedicated antenna can be configured according to customer requirements.

A powerful 4G 5G jammer

Effectively shield all 2G, 3G, 4G, 5G and WIFI signals of China Mobile/Unicom/Telecom;

12 RF modules work independently, 12 channels output, each channel RF power 2-3W;

Especially strengthen the power promotion for 3G, 4G, 5G, and fully ensure that the output power of each channel reaches 2W;

Possess future expansion space for 6G or other wireless frequency bands; more output channels (frequency bands) can support 24 channels;

The exquisite structure design, with invisible handle grooves embedded in the back, is not only convenient for carrying, but also suitable for wall-mounted fixed installation;

Adopt industrial-grade switching power supply, built-in precision voltage regulator circuit, even if the voltage fluctuates greatly, it will not affect the normal operation of the host;

The main body of the jammer adopts a fully enclosed protective shell design, which fully takes into account the problems of waterproof, dustproof and vandalism in special sites;

It is resistant to high temperature environment and can quickly transfer heat to the heat dissipation base (built-in ventilation duct heat dissipation fins) to avoid local heat accumulation;

Professional circulating air duct type heat dissipation base structure, the lower end quickly sucks in natural wind, and the upper end removes heat on both sides, ensuring stable operation of the equipment for 24 hours;

Built-in 4 ultra-quiet fans draw out hot air, and the fan speed can be adjusted; the equipment is completely noise-free during working hours;

Satisfy the requirements of continuous startup and use for many years, stable performance and long service life;

Harmless to human body. Complete product inspection and test reports; passed the electronic product safety test of the Ministry of Public Security;

The product has passed the environmental monitoring center’s electromagnetic radiation safety test;

The product has passed the electromagnetic radiation safety test of the provincial occupational health test center;

The extended interface and networking modes with intelligent networking linkage function include: power carrier + wireless, or: TCP/IP standard network communication;

MDPB 50A mobile phone signal jammer has a strong shielding effect

MDPB 50A cell phone signal jammer is a high-power mobile phone signal jammer specially developed and produced by adopting international advanced shielding technology to meet market demand. Compared with general signal jammers, MDPB-50A adopts a single channel 5W full power design, which has stronger shielding effect, wider shielding range, and more stable performance. It is suitable for a variety of large-scale secret places, especially prisons, detention centers, and conference rooms. Wait. MDPB-50A can automatically form a shielding magnetic field within the specified range when entering the working state, forcibly disabling mobile phone signals, MDPB-50A can shield mobile phone 2G, 3G, 4G, 5G communication signals and WIFI signals, but It will not interfere with the work of other electronic equipment, thus ensuring the safety of the required place. The mobile phone can be used without any damage to the human body after leaving the partition area, which is convenient and safe.

22 Antennas all Signal Jammers

Based on the principle of mobile phone (radio communication), this product uses broadband scanning technology to cut off the 2G, 3G, 4G, 5G and 2.4G WIIF wireless signal connections of the mobile phone, which manifests itself as a search network, no signal, no service system, etc., making the phone unable to call And answer, and can not send or receive text messages, but will not interfere with the work of other electronic equipment, thereby ensuring the safety of the required place, the mobile phone can be restored to normal use without any damage to the human body.